|
The Key To Quality Switches |
|
Standard with the 14UR1A are four two-tone codes, three of which are activation with the fourth one being the cancel code. Each of the three programmable codes have timers that can control the output relays. These timers can be programmed to an on time, off time and the total time, this will allow the siren to cycle for the specified alert notifications. The relay timers can be programmed anywhere from 1 sec to 3 minutes in 1 sec increments. Also the 14UR1A has an internal thermostat and heater which helps maintain a minimum temperature. Options for the Siren Controller include a DTMF decoder and a programming kit. The programming kit allows you to set the tome frequencies, and relay times. Each programming kit includes software and cable. |
|
GENERAL |
|
Enclosure:
Size:
Weight:
Temperature:
Input Voltage:
Thermostat Heater:
Output Relays:
Antenna: |
|
NEMA 4X Metal
15.75” x 11.8” x 5.9”
16lbs.
-25 F tp + 140 F
10—304 VAC: .25 Amp.
86 F
2 SPDT, 12AGW Max. 10 Amp @ 250VAC
1/4 Wave—Top Mount
|
|
Receiver |
|
Frequency Range:
Sensitivity: 12dB SINAD
Intermodulation:
Spurious Response:
Selectivity:
Antenna Impedance: |
|
142-174MHz 450-490MHz
.30uV @ 12.5 KHz .28uV @ 25 KHz
70dB 70dB
65dB 65dB
-60dB @ 12.5KHz -70dB @ 25KHz
50 Ohms |
|
Decoder |
|
Functions: 3 on codes 1 cancel code
Each on code may be programmed for steady on or cycle on/off. Each code may control relay 1, relay 2 or both.
Timing: On/Off Cycle Duration: 1 sec. to 30 min. In 1 sec. increments
Total Duration: 1 sec. to 30 min. In 1 sec. increments
Two-tone: Frequency Range: 300 to 3000Hz
Tone Timing: 1 sec./1 sec. 1 sec./3 sec. DTMF (optional): Digit Length: 1 to 14 digits
Inter-Digit Timeout: 200ms to 12 sec. |
|
Specifications Subject To Change Without Notice |
